M2052KATAN 16.000000

M2052 Series 5x7 mm, 3.3 Volt HCMOS/TTL High Operating Temperature SMT Oscillator FEATURES APPLICATIONS Extreme operating temperature range to 200°C Designed for harsh shock and vibration applications Hermetically sealed Long term reliability Small form factor 5x7 SMT Down Hole Drilling Tools Oil and Gas Exploration Extreme Thermal Applications Geo-Thermal Exploration ORDERING INFORMATION The M2052 Series HCMOS/TTL compatible clock oscillators offer a reliable solution for extreme environmental applications. The small form factor 5x7 SMT packages have excellent heat transfer characteristics and are hermetically sealed. The unique crystal mounting structure used on MtronPTI’s high reliability oscillators is capable of surviving mechanical shocks up to 1000 g’s and vibration levels to 20 g’s. With power consumption being a critical parameter for down-hole drilling applications, these HCMOS/TTL compatible XOs will draw as little as 1.5 mA of input current with a 3.3 V supply. ORDERING INFORMATION M2052 J A T A N 00.0000 MHz Product Series Temperature Range J: -40°C to +175°C K: -40°C to +200°C Stability A: ± 250 ppm Output Type T: Tristate Symmetry/Logic Compatibility A: 40/60% HCMOS/TTL Package/Lead Configurations N: Leadless Ceramic (6 Pads) Frequency (Customer Specified) Example Part Number: M2052JATAN 16 .0000 MHz 02/16/22 Rev. E http://www.mtronpti.com 407-298-2000 MtronPTI 2525 Shader Road Orlando, FL 32804 M2052 Series ELECTRICAL SPECIFICATIONS Parameter Frequency Range Symbol Min. F0 2 Typ. Max. Units 35 MHz Conditions Frequency Stabilities vs. Operating Temperature F/F -250 +250 ±3 ±2 vs. Aging ppm ppm ppm Includes initial tolerance @ +25°C and deviation over operating temperature range. 1st year Thereafter (per year) RF Output HCMOS/TTL Compatible Output Load Symmetry (Duty Cycle) Logic “1” Level 2 TTL or 15 pF 40 VOH 60 Ref to ½ VDD V HCMOS Load V HCMOS Load 90% VDD Logic “0” Level VOL 10%VD Rise/Fall Time TR/TF 4 Tristate Function (Pad1) % D ns Input Logic “1” or floating: Input Logic “0”: From 10% to 90% VDD. Frequency dependent. Output Active Output Disables to High Z Other Parameters Random Jitter RJ Operating Voltage VDD Operating Current IDD 5 12 Operating Voltage and Current 3.0 3.3 3.6 1.5 3.0 4.0 ps RMS (1-Sigma) V mA mA mA M7S @ 10 MHz @ 25 MHz @ 35 MHz ENVIRONMENTAL CONDITIONS Shock Vibration Hermeticity Solderability Max. Soldering Conditions Package Type Per MIL-STD-202, Method 213, Condition C (100 g’s, 6 ms duration, ½ sinewave) Per MIL-STD-202, Method 204, Condition D (10-2000 Hz at 20 g’s) Per MIL-STD-202, Method 112 (1 x 10-8 atm cc/s of helium) Per EIAJ-STD-002 See solder profile 5 X 7 X 1.9 mm leadless ceramic. RoHS compliant. 2 http://www.mtronpti.com 407-298-2000 MtronPTI 2525 Shader Road Orlando, FL 32804 M2052 Series OUTPUT WAVEFORM LOAD CIRCUIT DIAGRAM 3 http://www.mtronpti.com 407-298-2000 MtronPTI 2525 Shader Road Orlando, FL 32804 M2052 Series MECHANICAL, PIN OUT AND MARKING INFORMATION Pad 1 2 3 4 5 6 Function Tristate or N/C No Internal Connection Ground Output No Internal Connection Supply Voltage Legend XXMXXX Frequency MHz yy Year ww Work Week Part Marking Line 1 M2052 Line 2 xxMxxx Line 3 Myyww 4 http://www.mtronpti.com 407-298-2000 MtronPTI 2525 Shader Road Orlando, FL 32804 M2052 Series HANDLING INFORMATION Although protection circuitry has been designed into the M2052 Series oscillator, proper precautions should be taken to avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation. ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industry-wide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was obtained using these circuit parameters. Model Human Body Charged Device ESD Threshold Minimum 1500* 1500* Unit V V * MIL-STD-883D, Method 3015, Class 1 QUALITY PARAMETERS Test Electrical Characteristics Frequency vs. Temperature Mechanical Shock Vibration Thermal Cycle Aging Gross Leak Fine Leak Solderability Resistance to Solvents Terminal Pull Lead Bend Physical Dimensions Internal Visual Method Internal Specification Internal Specification MIL-STD-202, Method 213, C MIL-STD-202, Method 201-204 MIL-STD-883, Method 1010, B Internal Specification MIL-STD-202, Method 112 MIL-STD-202, Method 112 MIL-STD-883, Method 2003 MIL-STD-883, Method 2015 MIL-STD-883, Method 2004, A MIL-STD-883, Method 2004, B1 MIL-STD-883, Method 2016 Internal Specification Test Condition Per Specification Per Specification 100 g’s 10 g’s from 10-2000 Hz -55°C to +125°C, 15-minute Dwell, 10 cycles 168 Hours at 105°C 30 Second Immersion Must meet 1x10-8 8 Hour Steam Age – Must Exhibit 95% coverage Three 1-minute soaks 2 Pounds 1 Bending Cycle Per Specification Per Internal Specification 5 http://www.mtronpti.com 407-298-2000 MtronPTI 2525 Shader Road Orlando, FL 32804 M2052 Series LEAD FREE SOLDER PROFILE TAPE AND REEL SPECIFICATIONS A 6.51 B 9.29 C 1.5 D 7.5 E 2.8 F 4 G 8/12 H 16 J 180‐330 K 13 L 21 M 60‐100 MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice.  No liability is assumed as a result of their use or application.  http://www.mtronpti.com 407-298-2000 MtronPTI 2525 Shader Road Orlando, FL 32804 6